Shark Steam & Scrub Automatic Steam Mop with Steam Blaster S8201UK

Shark Clean

Shark Steam & Scrub Automatic Steam Mop with Steam Blaster S8201UK

Name: Shark Steam & Scrub Automatic Steam Mop with Steam Blaster S8201UK
Brand: Shark Clean

€189.99

Sale Sold out

Taxes included. Shipping calculated at checkout.

The Shark Steam & Scrub Automatic Steam Mop with Steam Blaster scrubs and sanitises*** at the same time. The combination of steam and rotating pads delivers powerful performance while providing chemical-free hard floor cleaning.

Quantity

View full details

Features
Details
Specifications
What's Included
FAQs
User Guides
Accessories

Up to 2 x better stain removal*

More steam. More power.

Chemical-free cleaning

3 automatic steam settings

UK's no.1 floor steam cleaner*, upgraded - now includes Steam Blaster Technology.
Gently scrubs and sanitises** all sealed hard floors
Up to 2x better stuck-on stain removal*** with 150 rotations per minute
Targets dirt with a powerful blast of steam
Chemical-free cleaning: Removes dust, residue, grease, grim & bacteria using water alone
3 automatic modes: Light, Normal, Deep
Includes 4 Dirt Grip pads, 8-metre power cord, LED headlights
Height: 119cm. Weight: 3kg. Colour: White & Grey. 2-year guarantee upon registration with Shark

*3rd Party sales data by volume, Jan'25-Dec'25. For verification go to sharkninja.co.uk/verification.html

**Sanitisation studies were conducted under controlled test conditions. Household conditions and results may vary. See instruction booklet for details.

***Tested to IEC62885-6 CI 5.1 using mustard, versus predecessor Shark S1000UK.

Colour	White & Grey
Product Weight	3.4kg
Product Dimensions (cm)	H:120.6cm x L:21.7cm x W:37.8cm
Cord Length	5.18m
Capacity	Clean Water Tank: 350ml
Wattage	1120
Guarantee	2 years
Barcode	0622356287692

Main Unit
4 x Dirt Grip Pads

Can I use the Shark Steam & Scrub on all floor surfaces?

This steam mop is designed for use on most hard floor surfaces. We recommend that you first test an isolated area of the surface to be cleaned and review the use and care instructions from your floor manufacturer. Surfaces/materials where the steam mop should NOT be used: 1. Wax-polished furniture or floors. 2. Unsealed or unglazed ceramic floors, unsealed wooden and wax floors, and some unwaxed floors. 3. In cases of surfaces treated with wax and some unwaxed floors, the sheen may be removed by heat or steam. Test an isolated area first to see if sheen is affected. Steam mops are ideal for laminate, bamboo, hardwood, marble, tile, and stone. See Instruction Booklet for usage instructions.

Can I add a cleaning solution to the water tank?

Only use distilled water. DO NOT use any cleaning solutions, scented perfumes, oils, vinegar, or any other chemicals, as they may damage the unit or make it unsafe to use.

How do I fill the water tank?

To open the water tank, pull the lid down. Use the filling flask to pour distilled water into the tank. Make sure not to exceed the Max Fill line. When finished, close the tank lid firmly. Caution: Only use distilled water. Using cleaning solutions may damage the unit.

What are the differences between the Intelligent Steam Control settings?

This steam mop has 3 Intelligent Steam Control settings so you can select the speed of the rotating discs and choose the ideal amount of steam to use for each cleaning task. LIGHT: Use on hardwood, laminate, and vinyl. For cleaning delicate surfaces, loosening and lifting light dirt, and light cleaning and dusting. NORMAL: Use on marble, tile, and stone. Cleans most surfaces and large areas. For basic, everyday cleaning, and cleaning moderate and heavy-traffic areas. DEEP: Use on marble, tile, and stone. For deep cleaning and mopping hard-to-clean surfaces, removing stuck-on messes and stains, cutting through heavy dirt and grime, and sanitising*. (*Sanitisation studies were conducted under controlled test conditions. Household conditions and results may vary. See instruction booklet for details.)

How do I use the steam mop to sanitise* floors in NORMAL mode?

Plug in the unit and press the mode button twice to select the NORMAL setting. Then tilt the mop handle down to activate the spinning discs. Wait 30 seconds for the unit to begin producing steam. Start mopping on an appropriate sealed hard floor surface, using a forward and backward motion. After 3 minutes, the unit will be ready to sanitise. Using a forward and backward motion, move the unit over the area to be sanitised. Repeat at least 15 times. (*Sanitisation studies were conducted under controlled test conditions. Household conditions and results may vary. See instruction booklet for details.)

How do I know when the pads need to be replaced?

Dirt Grip cleaning pad lifespan is affected by factors such as how frequently they are used, type of cleaning (heavy or light) and how often the pads are washed and dried. Under normal household conditions, when using the steam mop for routine cleaning a few times per week, we recommend replacing the pads every 3-4 months.

What should I do if my Shark® Steam & Scrub is difficult to push?

The Shark Steam & Scrub glides best on hard floor surfaces when steam is being produced. If there is steam output, check that the Dirt Grip pads are correctly attached to the mop head. If the pads are attached properly, ensure that your mop has been on for at least 3 minutes. If not, the pads may need more time to saturate. Leave the mop on for at least 3 minutes and check to see if it is still difficult to push.

What should I do if my Shark Steam & Scrub leaves too much water on the floor?

If your Shark Steam & Scrub is in DEEP mode, press the mode button twice to select LIGHT mode. Check the pads. If the pads are dripping wet, change them. Note: Never leave the steam mop with a damp or wet pad on any floor for an extended period.

S8201UK Instruction Booklet

Shark Steam & Scrub Dirt Grip Pads (Twin Pack)

€19.99

Shark Steam & Scrub Dusting Pads

€19.99